Snom
      Back to home
      1. Luminate Knowledge Base
      2. HARDWARE
      3. Snom

      Snom - General Information

      Phonism to Streamline Configuration of Snom's M500 DECT

      Provisionable Devices

      • The Builder is enabled for the D120, D717, D735, D785, and D7 Expansion Module.
      • M700 Multi-Cell DECT is provisionable as of v41.
      • Older models should be able to be provisioned, however they have not been tested nor are SNAPbuilder profiles included
      • The following Snom branded devices are known to be Vtech format: M100KLE, C620, and C520.

      Become a Snom Partner

      For information about joining Snom's partner program please see

      https://www.snom.com/partners/partner-portal/

      Provisioning URL

      The following methods can be used to get the phones pointed to the Endpoints Module

      1. The Luminate Provisioning Tool can be used to provision Snom phones remotely. (See guide here).
      2. Log into the device's admin interface and navigate to Setup > Advanced > Update.
        1. Set the Setting URL field to http://SERVER_NAME/cfg/{mac}.
        2. Click Apply, then Reboot.
      3. Use DHCP option 160.
      4. Use the Snom redirection service.

      Builder

      Builder provisioning of Snom phones was added in v40.

      Overrides

      Overrides with indexes should be entered like

      user_descr_contact1="off"

      The Endpoints code (since v40.2) will convert this to the XML format:

      <user_descr_contact idx="1" perm="rw">off</user_descr_contact>

      Shared Line Appearance (SLA)

      SLA is currently not available with Snom devices.

      Static Call Park

      Static call parking was tested successfully with Directed-Parktrieve.

      Geo-Redundancy

      SnomXML format uses SRV for geo-redundancy.

      Transport

      Transport configuration can be selected from Portal and Endpoints Admin UI.