Yealink
      Back to home
      1. Luminate Knowledge Base
      2. HARDWARE
      3. Yealink

      How to configure the Yealink W80B Multi Cell System

      1. Log in to the Portal.
      2. Navigate to Inventory > Phone Hardware
      3. Click on Add Phone
      4. Set the following options
        1. Model - Yealink W80B
        2. Mac Address - Mac Address of the Base
        3. Line X - User extension each line will be assigned to
      5. Once those fields are filled out click on the Advanced Tab at the top
      6. Add the below Overrides, replacing any X's with the number of the base
      static.station.mode="0" 
      station.X.name="Base X" 
      station.allowed.x.name="Base X" 
      station.allowed.x.mac="<Mac Address of the additional base>
      • Note: You will need to repeat the above override x times for the amount of bases you will be configuring in addition to the DM

      Once added click on Save and then proceed to provision the device.

      After all of the above steps have been completed, the DM should automatically pick up on the other bases as long as the MAC address have been configured and they are able to reach each other over the network